How do you lubricate a bike chain correctly?
Lubricating a bike chain may seem simple, but the way you do it makes a difference. By applying the chain oil carefully and removing excess oil, you prevent using unnecessarily large amounts of lubricant.
In this blog, you will discover when to lubricate a bike chain, how to do it step by step, and why it is better not to use too much oil.
When should you lubricate a bike chain?
Regularly check whether your bike chain needs more chain oil. How often you need to lubricate it depends on several factors, including how often you cycle, the weather conditions, and the type of chain oil you use.
It may be time to lubricate your bike chain when:
-
The chain feels dry or makes more noise than usual.
-
It has been a while since you last applied chain oil.
-
You have thoroughly cleaned and degreased the chain.
-
You have frequently cycled in rainy or wet conditions.
It is better not to wait until the chain starts squeaking loudly. Check it regularly and follow the instructions for use of your chain oil for the best maintenance.
Step 1: clean the chain
Before applying new chain oil, first check whether the bike chain is clean. Applying new oil to a heavily soiled chain can cause dirt and old lubricant residues to continue building up.
First, remove loose dirt with a clean cloth or brush. Is the chain heavily soiled with sand, mud, or old oil? Then clean it with a suitable chain degreaser and follow the instructions for use of the product.
This ensures that you apply the new chain oil to a chain that is ready to be lubricated again.
Step 2: make sure the chain is dry
After cleaning, the bike chain must be sufficiently dry before you apply new chain oil. This prevents unnecessary moisture from remaining when you lubricate the chain again.
Carefully wipe the chain with a dry, lint-free cloth and allow it extra time to air dry if necessary.
Did you only wipe the chain with a dry cloth and not clean it with water? Then check whether any visible dirt or moisture remains before continuing.
Step 3: apply the oil carefully
Is the bike chain clean and sufficiently dry? Then you can apply the chain oil.
Slowly turn the pedals backward and, while moving, apply a small amount of oil to the moving links of the chain. Work carefully and try to apply the oil as precisely as possible.
You do not need to make the chain completely wet with oil. The goal is to lubricate the moving parts properly without using unnecessarily large amounts of product.
Always follow the instructions for use of your chain oil for the best results.
Step 4: let the oil spread
After applying the chain oil, turn the pedals backward slowly a few more times. This allows the oil to spread over the moving links.
Then give the oil time to work according to the instructions for use of the product. The recommended curing time may vary depending on the type of chain oil.
Then wipe away the excess oil with a clean cloth.
Step 5: wipe away excess oil
After lubricating, use a clean, lint-free cloth to wipe away excess oil from the outside of the bike chain.
This is an important step: a thick layer of oil on the outside can attract dust and road dirt, causing the chain to become dirty again more quickly.
The chain therefore does not need to remain shiny and wet. The goal is for the moving parts to be sufficiently lubricated, while leaving as little excess oil as possible on the outside.
How much chain oil do you need?
The correct amount of chain oil depends on the product and the condition of your bike chain. There is therefore no universal amount that applies to every chain and every type of chain oil.
Apply the oil carefully to the moving links and follow the instructions for use of the product. The goal is to lubricate the chain sufficiently without leaving a thick layer of oil on the outside.
When it comes to chain oil: apply it precisely and wipe away excess oil. Using more oil does not automatically mean your chain is better lubricated.
What happens if you use too much oil?
Using more chain oil is not automatically better. Excess oil on the outside of the chain can attract dust, sand, and road dirt.
This can cause a layer of dirt to form more quickly on the chain and around the drivetrain. You may then need to clean the chain again sooner.
Therefore, only apply the required amount of oil and wipe away excess oil with a clean cloth after lubricating. This keeps the chain better cared for and prevents an unnecessary buildup of dirt.
read also - how do you degrease abike chain
Do you want to properly maintain your bike chain? With Velpur Chain Oil, you lubricate the chain after cleaning and drying it. Apply the oil carefully and wipe away excess lubricant with a clean cloth.
Also discover our other products for cleaning and maintaining your bike and e-bike.