Bike and e-bike maintenance in autumn: 10 practical tips
Autumn is a beautiful season for cycling, but your bike also takes a lot more abuse during this period.
Rain, wet leaves, mud, sand and road grime are more likely to stick to your bike. If you cycle or ride an e-bike to work every day in autumn, you'll notice this especially on the frame, wheels and chain.
Fortunately, good autumn maintenance doesn't have to be complicated. With a few simple habits, you can keep your bike or e-bike clean and prevent dirt from building up.
Why does your bike need extra maintenance in autumn?
In autumn, your bike is more likely to come into contact with rain, mud, sand and wet leaves. This dirt can build up on the frame, around the wheels and on the drivetrain. Especially if you cycle several times a week, it is important to clean your bike regularly and check the most important parts.
Water and dirt on your bike chain also deserve extra attention. By cleaning your bike regularly and properly maintaining your chain, you help reduce unnecessary wear and tear. You don't need to perform complicated maintenance for this: a few simple habits will get you a long way.
1. Don't leave dirt on your bike unnecessarily long
After a rainy ride, mud, sand and road spray often remain on your bike. Don't leave this dirt on unnecessarily long, as this prevents it from building up further.
You don't need to wash your bike completely after every short ride. Remove visible dirt and pay extra attention to areas where mud and sand collect, such as around the wheels and the frame.
Do you want to clean your bike thoroughly? Then use a suitable bike cleaner, such as the Velpur Ultimate Bike Cleaner.
Also read our blog: How do you clean a bike?
2. Keep your bike chain clean and well lubricated
Your bike chain takes extra abuse during autumn. Rain, sand and mud can mix with the lubricant on the chain. This can cause the drivetrain to get dirty more quickly.
Is your chain heavily soiled? Then clean it first with a suitable bike chain degreaser before lubricating it again. This prevents you from applying new oil on top of a layer of dirt.
For example, use the Velpur Degreaser to remove stubborn dirt and grease from your bike chain. Let the chain dry thoroughly after cleaning and then apply a suitable chain oil, such as the Velpur Chain Oil.
Note: do not use the Degreaser on a belt drive. The Ultimate Bike Cleaner is suitable for bikes with a belt drive.
3. Check your chain after rainy rides
After a wet ride, it is wise to check your bike chain. Rain can spread dirt and cause the lubricant to disappear more quickly.
Pay particular attention to the following signs:
-
There is visible dirt or sand on the chain.
-
The chain sounds dry or makes more noise than usual.
-
The chain appears insufficiently lubricated.
Do you notice that your chain is dirty or dry? Clean it if necessary and then apply suitable chain oil. This helps keep the chain running smoothly.
Do you want to know how often you should lubricate your bike chain? Then also read our blog ‘How often should you lubricate a bike chain?’
4. Remove leaves and mud
Wet leaves, mud and sand easily stick to your bike during autumn. Dirt can build up especially around the mudguards, wheels and frame.
Therefore, regularly check these areas:
-
Around the wheels and mudguards.
-
On the frame and at the bottom of the bike.
-
Around the drivetrain, where dirt easily collects.
Remove accumulated dirt with a soft brush or sponge and use a suitable bike cleaner if necessary. This makes it easier to keep your bike clean and limits dirt build-up.
5. Do not leave your bike wet for extended periods
Are you coming home after a rainy ride? Then you don't need to perform a full cleaning immediately.
Do remove excess water and let your bike dry thoroughly afterwards. A soft microfiber cloth is useful for removing water from the frame.
Are you storing your bike indoors or in storage? Then it is nice not to put it away completely wet and dirty.
6. Give your frame extra protection
During autumn, your bike comes into contact with water and dirt more often. After you have cleaned your bike and the frame is completely dry, you can choose to protect it extra.
The Velpur Frame Protect is intended as a protective treatment for suitable bike surfaces. Always follow the instructions for use when applying it and make sure the surface is clean and dry.
This makes frame maintenance a simple part of your cleaning routine.
7. E-bike maintenance in autumn: pay extra attention to water
The same basic principles apply to an e-bike as to a regular bike, but it is extra important to handle water carefully.
Do not use a pressure washer and do not direct a powerful water jet at electrical components. Clean your e-bike carefully and always follow the manufacturer's instructions for the battery, motor and other electrical components.
The Velpur Ultimate Bike Cleaner is suitable for cleaning e-bikes. Bikes with a belt drive can also be cleaned with this.
Also read our blog ‘How do you clean an e-bike?’
Also read - How do you clean an e-bike
8. Check your brakes
Wet leaves, mud and rain can change the conditions in which you brake. Therefore, it is important to check your brakes regularly during autumn.
Check whether your brakes function normally and whether you hear unusual noises.
Do you notice that the braking power is clearly reduced, do you hear strange noises or does braking feel different than normal? Then have your bike checked by a bike shop before you continue cycling.
9. Check your tires
Wet autumn roads can be slicker, especially when there are leaves or other dirt on the road. Therefore, it is wise to check your tires regularly.
Pay attention to:
-
Tire pressure.
-
The condition of the tread.
-
Visible damage.
-
Signs of wear.
Correct tire pressure and tires in good condition contribute to comfortable and controlled cycling.
10. Don't forget your lights
In autumn it gets dark earlier and the weather conditions are not always ideal. Good bike lights are therefore extra important.
Regularly check whether your front and rear lights work properly and whether you are clearly visible in traffic.
With an e-bike, it is also wise to check whether the lights work correctly when they are powered by the bike battery.
How often should you clean your bike in autumn?
There is no fixed frequency that applies to every cyclist. How often you need to clean your bike depends mainly on how often you cycle and under what conditions.
Do you cycle daily through rain and mud? Then your bike will need a cleaning more often. Do you mainly use your bike in dry weather? Then cleaning may be needed less often.
A good rule of thumb: look at your bike, not just the calendar.
Do you see a lot of dirt, mud or sand? Then clean your bike. Is your bike barely dirty? Then a quick check and possibly drying it off is often sufficient.
A simple autumn routine for cyclists
Do you want to keep maintenance simple? Then make it a small routine. This way, you are less likely to forget the most important checks.
After a wet ride
-
Check your bike for mud and leaves.
-
Remove visible dirt.
-
Dry off excess water.
-
Check your bike chain.
Weekly with intensive use
-
Check the condition of your chain.
-
Check your tires and brakes.
-
Look to see if dirt has accumulated around the drivetrain.
-
Check your lights.
Every few weeks
-
Give your bike a more thorough cleaning when necessary.
-
Clean a heavily soiled bike chain and then lubricate it
What do you need for autumn maintenance?
For most cyclists, a small basic set is sufficient to keep their bike clean during autumn and maintain it regularly.
You can think of:
-
A suitable bike cleaner.
-
A soft bike brush or sponge.
-
A microfiber cloth to remove water and dirt.
-
A suitable degreaser for the bike chain.
-
Chain oil to re-lubricate the chain after cleaning.
-
Possibly a protective product for suitable frame surfaces.
With these simple products, you can perform much of the regular cleaning and maintenance yourself.
Do you notice technical problems or are parts worn out? Then have your bike checked by a bike shop.
Bike and e-bike maintenance in autumn: the most important points
Autumn mainly calls for some extra attention to dirt and moisture. You don't need to clean your bike completely after every rain shower, but it is wise not to leave visible dirt unnecessarily long and to check your bike chain regularly.
During autumn, pay particular attention to these points:
-
Remove mud and other visible dirt.
-
Remove leaves that accumulate around your bike.
-
Regularly check your bike chain.
-
Clean a heavily soiled chain before lubricating it again.
-
Remove excess water and let your bike dry.
-
Check your brakes, tires and lights.
-
Be careful with water on e-bikes and follow the manufacturer's instructions.
-
Protect your frame if desired with a suitable protective product.
With a small maintenance routine, you keep your bike or e-bike neat and ready for the next ride even during wet autumn months.
Also interesting
- how do you clean a bike
- how do you clean an e-bike
- cleaning an e-bike after a rainy ride
- how often should you clean an e-bike
- how do you degrease a bike chain
- how often should you lubricate a bike chain
For optimal protection against autumn rain, use our Naturel-based Velpur Chain Oil