A speed pedelec with a chain? Here is how to maintain it!

A speed pedelec with a chain: how to maintain the drivetrain

A speed pedelec is ideal for quickly covering longer distances. But anyone who regularly rides a speed pedelec with chain drive knows that the drivetrain takes quite a beating. The combination of pedaling power, assistance, mileage, and changing weather conditions makes proper chain maintenance important.

With a few simple steps, you can keep your chain clean and well lubricated. This helps limit unnecessary wear and keeps your drivetrain running smoothly. You don't need to be a certified bike mechanic to do it.

Why is chain maintenance important for a speed pedelec?

A speed pedelec is often used intensively, for example for commuting. As a result, the chain can regularly be exposed to rain, dust, sand, and road grime.

When dirt mixes with chain oil, it creates a mixture that can cause extra wear on the chain and sprockets. Regularly cleaning the chain and lubricating it correctly helps remove that dirt and keep the moving parts in good condition.

Want to know how to thoroughly degrease a bike chain? Then also read our guide on how to degrease a bike chain.

Step-by-step: a clean and well lubricated chain in 4 steps

1. Clean the chain with a degreaser

Before applying new chain oil, it is important to remove accumulated dirt and excess old oil. Applying new oil to a heavily soiled chain will not solve the problem.

  • Apply a suitable chain degreaser to the soiled chain.

  • Let the product work according to the instructions for use.

  • Use a chain brush or a suitable soft brush to gently loosen the dirt.

  • Remove the loosened dirt and the residues of the cleaning product according to the instructions.

  • Dry the chain thoroughly before applying new oil.

With Velpur Degreaser, you can help clean your chain. Apply the degreaser carefully and prevent the product from getting on brake discs, brake pads, or other brake surfaces. Protect these parts if necessary during cleaning.

2. Choose a suitable chain oil

After cleaning, the chain must be lubricated again. Choose a chain oil that is suitable for your chain and the conditions in which you cycle.

Do you use your speed pedelec daily, even in the rain? Then it is extra important to regularly check the lubrication. Follow the instructions for use of the chain oil and take the manufacturer's recommendations into account.

The Velpur Chain Oil is intended for lubricating bike chains. This makes lubricating an easy step in your maintenance routine.

3. Apply the chain oil drop by drop

Make sure the chain is dry after cleaning. Then apply a small amount of oil to the rollers of the chain while slowly turning the pedals backward.

Work slowly and distribute the oil evenly over the chain. Do not use more than necessary: a thick layer of oil on the outside easily attracts extra dust and dirt.

Be careful to only turn the pedals backward when it is safe to do so and keep your fingers away from moving parts.

4. Wipe away excess oil

Give the oil time to distribute according to the product instructions. Then take a clean, dry cloth and carefully wipe the excess oil from the outside of the chain.

The moving parts of the chain must be well lubricated, but a thick, wet layer on the outside is not necessary. This helps prevent dirt from accumulating quickly again.

How often should you maintain the chain of a speed pedelec?

There is no fixed number of kilometers that applies to every speed pedelec. How often you need to clean and lubricate the chain depends, among other things, on your riding style, the weather conditions, the type of chain oil, and the extent to which the chain gets dirty.

Follow these simple guidelines:

  • In dry weather and with little dirt: check the chain regularly and lubricate when necessary.

  • After rain or riding on wet, dirty roads: check the chain and remove dirt. Lubricate again when the chain has been cleaned or is insufficiently lubricated.

  • With a dirty chain or audible creaking: check the drivetrain and clean and lubricate the chain if necessary.

Do not automatically degrease the chain at every lubrication. Thorough degreasing is especially useful when the chain is heavily soiled or when the old oil and dirt need to be removed first. Cleaning too often or unnecessarily aggressively is not necessary.

Also read how often you need to lubricate a bike chain for more practical maintenance tips.

Make chain maintenance easy with Velpur

Want to clean your bike chain and then lubricate it again? With the Velpur Total Care Kit, you have several products for the maintenance of your bike or e-bike together.

Regularly checking, cleaning when necessary, and lubricating correctly helps you keep the drivetrain of your speed pedelec in good condition.

Do you ride a speed pedelec with a belt drive instead of a chain? Then different maintenance rules apply. Therefore, also read [can Velpur Ultimate Bike Cleaner be used on the belt of a speed pedelec?]

https://velpur.be/blogs/news/mag-velpur-ultimate-bike-cleaner-op-de-riem-van-een-speed-pedelec