Winter and road salt: How to protect the paint and chain of your bicycle or e-bike

Winter and road salt: how to protect your bike or e-bike's paintwork and chain

Do you also cycle to work in winter or enjoy a winter bike ride? Then your bike often has to endure more. Rain, mud, moisture and road salt can accumulate on the frame, chain and other components.

Road salt and brine deserve extra attention in particular. In combination with moisture, they can promote corrosion of metal parts. That is why it is important to regularly check your bike during the winter and remove dirt in a timely manner.

With a simple maintenance routine, you help keep your bike or e-bike in good condition, even during the cold and wet months.

1. Protect your bike frame during the winter

During winter rides, your frame has to deal with a lot of dirt and splashed water. When mud and brine accumulate, they can contaminate the finish of your bike and cause damage over time if you do not remove them.

A thoroughly cleaned frame is therefore a good basis for winter maintenance.

The tip: after cleaning, you can use a suitable frame protector. Velpur Frame Protect contains carnauba wax and is intended to care for the bike frame. The protective layer can help make the frame water- and dirt-repellent.

Apply the product according to the instructions on a clean frame. Use a microfiber cloth to rub the product in evenly and check whether it is suitable for the finish of your bike.

Note: frame protection does not replace the regular removal of road salt and winter dirt.

2. Give your bike chain extra attention

The bike chain has to deal with a lot of moisture and dirt in winter. Especially after rides on wet, salted roads, it is wise to check the chain.

When a chain remains dirty and damp for a long time, the risk of rust formation increases. Accumulated dirt can also accelerate the wear of the drivetrain.

The tip: remove dirt from the chain when necessary, dry the chain thoroughly and, if necessary, reapply chain oil.

With Velpur Chain Oil you can re-lubricate the chain so that the links continue to move smoothly. Follow the instructions and adapt the maintenance to your riding conditions. In heavy rain and dirt, maintenance may be needed more often than during the dry summer months.

A well-maintained chain helps keep your drivetrain running smoothly and limits unnecessary wear.

3. Remove road salt after a winter ride

Did you cycle on roads that have been salted? Then do not leave dried brine on your bike for longer than necessary.

You do not need to perform a full wash after every ride. However, in the case of visible salt, mud or a lot of splashed dirt, it is wise to clean your bike in a timely manner.

This is how you do it:

  1. First, remove loose mud and dirt.

  2. Rinse the frame carefully with a soft stream of water.

  3. Use a suitable bike cleaner to loosen any remaining dirt.

  4. Rinse again according to the instructions and dry the bike where necessary with a microfiber cloth.

  5. Check the chain and re-lubricate it if necessary.

The Velpur Ultimate Bike Cleaner helps remove mud, road grime and other deposits from your bike.

Do not use a pressure washer and do not direct a powerful stream of water at bearings, seals, electrical connections or other sensitive components. Careful cleaning is also important for an e-bike.

4. Extra attention for your e-bike and the battery

An e-bike also needs regular maintenance during the winter. Keep the frame clean and pay attention to the chain or other drivetrain components, depending on the type of bike.

The battery also deserves extra attention. Low temperatures can temporarily reduce the available range.

The tip: follow the manufacturer's guidelines for storing, charging and using the battery. Store a removable battery as prescribed in a dry place at a suitable temperature and only charge a cold battery once it has returned to the permitted temperature range.

Also regularly check whether the battery and electrical connections are clean and dry. Do not use bike cleaner directly on electrical connections and prevent water from getting into open connections.

5. How often should you clean your bike in winter?

There is no fixed rule that applies to every cyclist. How often you need to clean depends on your usage, the weather and the amount of dirt on the bike.

  • After a dry ride: check whether your bike is dirty and inspect the chain.

  • After a wet ride: remove excess water and check the drivetrain.

  • After a ride on salted roads: remove visible road salt and brine as quickly as possible.

  • For daily winter use: schedule a short check and cleaning regularly instead of waiting until dirt has heavily accumulated.

A short maintenance routine is often sufficient to keep your bike tidy. A more thorough cleaning is needed when dirt accumulates.

Make winter maintenance easy with Velpur

Your bike does not have to stand still as soon as it gets colder. By removing dirt and road salt in a timely manner, properly maintaining your chain and regularly checking your bike, you help limit unnecessary wear.

Velpur offers maintenance products for cyclists who want to take good care of their bike or e-bike during the winter as well.

Discover the full Velpur range of bike and e-bike maintenance products.

Also read